The CUBUS-L single carport is the largest single carport on the market and is suited to a very large car, or if you want to park a bike at the end of the carport, for example. The CUBUS-L single carport is also the single carport that makes it possible to add the tool shed for a CUBUS steel double carport at the side of the carport if you want a large storage room with your single carport. This gives you a tool shed of more than 13m2 for storing bikes, garden tools, tools, etc. And of course you can add walls to the carport if you need screening from the neighbours or garden.
The CUBUS-L carport can also be wall-mounted
Width: 3,7 metres
Length: 5,8 metres
Height: 2,4 metres
The extra-large single carport for a large car. The CUBUS-L single carport is made of certified steel that is first galvanised and then powder-coated for maximum protection. The carport has polycarbonate roof panels with a honeycomb structure for maximum strength. These are bronze-tinted (dark) to give maximum protection to the car, and they stay looking better for many years because algae, pollen and leaves/twigs are not so easily seen. The CUBUS-L single carport is available with a range of accessories such as side & end walls and a tool shed. Opal-white roof panels are available as an optional extra if the carport is placed by windows where daylight would otherwise be significantly reduced.
If our standard dimensions don’t fit, we can always make the CUBUS single carport to exactly the dimensions you need. Simply send us an enquiry using the contact form at the bottom of the page.
Prices include VAT, delivery and standard installation.
Additional price for LED lighting: DKK 5.000,00
Carport dimensions: W:3,7*L:5,8*H:2,4 m
Shed dimensions: W:3,7*L:2,3*H:2,4 m
Overall dimensions: W:3,7*L:8,1*H:2,4 m
The CUBUS-L single carport can be fitted with a tool shed for storing garden tools, barbecue, bikes, tools, etc. The shed is not insulated, but protects against rain, wind and unwelcome visitors. The double door comes with stainless steel hinges and handles plus a cylinder lock for secure locking. The tool shed has the same polycarbonate roof panels as the CUBUS carport.
If our standard dimensions don’t fit, we can always make the CUBIC tool shed to exactly the dimensions you need. Simply send us an enquiry using the contact form at the bottom of the page.
Shed information: An Allview shed is not insulated and should be placed on a level base of paving slabs so that the sides sit evenly against the paved surface. It should only be used to store items such as tools, bikes, garden tools and similar. The shed is not suitable for storing clothes, cardboard boxes, cushions/pillows, etc.
If items made of organic material are to be stored in an uninsulated shed, they should be kept on shelves and in airtight packaging.
Prices include VAT, delivery and standard installation.
Additional price for LED lighting: DKK 5.000,00
Width: 5,3 metres
Height: 2 metres
An elegant, full-coverage side wall in black composite plank that is maintenance-free and shields you from the neighbours or garden.
The side wall is 2,0 m high and stops 15cm below the roof to let natural light in.
Prices include VAT, delivery and standard installation.
Additional price for LED lighting: DKK 5.000,00.
Width: 5,3 metres
Height: 1,9 metres
An elegant, screening steel side wall that is maintenance-free and shields you from the neighbours or garden while letting a little light through.
The side wall is 1,9 m high and stops 25cm below the roof to let natural light in. The wall is ideal where you want a reasonable degree of screening while still letting more light and air pass through the side wall.
Prices include VAT, delivery and standard installation.
Additional price for LED lighting: DKK 5.000,00.
Width: 3,2 metres
Height: 2 metres
An elegant, full-coverage end wall in black composite plank that is maintenance-free and shields you from the neighbours or garden.
The end wall is 2,0 m high and stops 15cm below the roof to let natural light in.
Prices include VAT, delivery and standard installation.
Additional price for LED lighting: DKK 5.000,00.
Width: 3,2 metres
Height: 1,9 metres
An elegant, screening steel end wall that is maintenance-free and shields you from the neighbours or garden while letting a little light through.
The end wall is 1,9 m high and stops 25cm below the roof to let natural light in. The wall is ideal where you want a reasonable degree of screening while still letting more light and air pass through the end wall.
Prices include VAT, delivery and standard installation.
Additional price for LED lighting: DKK 5.000,00.
Width: 5,3 metres
Height: 2,15 metres
An elegant, airy side wall that creates a physical boundary while still allowing a clear view through. Timber slats are not supplied by ALLVIEW. These must be purchased by the customer. This side wall requires the following timber slats:
Vertical slats: 63 pcs, 212cm long, max. 25mm thick
Horizontal slats: 54 pcs, 152cm long and 27 pcs, 202,5cm long, max. 25mm thick
With a slat width of 40mm, 50% of the light will pass through the wall. If you want less light through the slatted wall, the slat width can be increased. We do not recommend slats narrower than 40mm, for the sake of each slat’s stability.
For this end wall we recommend heat-treated timber slats (such as Superwood or Termowood) approx. 50mm wide. This will leave a gap of approx. 3cm between each slat.
We recommend treating the timber slats with a suitable oil/stain to protect them against the weather.
Prices include VAT, delivery and standard installation. (the price includes fitting the slats, provided they are ready and cut to size at the time of installation)
Additional price for LED lighting: DKK 5.000,00.
Width: 3,2 metres
Height: 2,15 metres
An elegant, airy end wall that creates a physical boundary while still allowing a clear view through. Timber slats are not supplied by ALLVIEW. These must be purchased by the customer. This end wall requires the following timber slats:
Vertical slats: 38 pcs, 212cm long, max. 25mm thick
Horizontal slats: 54 pcs, 153,5cm long, max. 25mm thick
With a slat width of 40mm, 50% of the light will pass through the wall. If you want less light through the slatted wall, the slat width can be increased. We do not recommend slats narrower than 40mm, for the sake of each slat’s stability.
For this end wall we recommend heat-treated timber slats (such as Superwood or Termowood) approx. 50mm wide. This will leave a gap of approx. 3cm between each slat.
We recommend treating the timber slats with a suitable oil/stain to protect them against the weather.
Prices include VAT, delivery and standard installation. (the price includes fitting the slats, provided they are ready and cut to size at the time of installation)
Additional price for LED lighting: DKK 5.000,00.